← Back to Home
Pricing Guide

ASPHALT PAVING COST GUIDE
UPSTATE NEW YORK

Wondering how much driveway paving costs in upstate NY? This guide breaks down real pricing for asphalt paving, sealcoating, and repairs in Warren, Washington & Saratoga counties — with no fluff, no national averages, just local numbers.

Upstate NY Pricing

PAVING COST BREAKDOWN

Prices reflect typical ranges for Warren, Washington & Saratoga counties, NY. Actual cost depends on site conditions. Free on-site estimates available.
ServicePrice RangeTypical Job Cost
New Asphalt Driveway (residential)$3 – $7 per sq ft$4,500 – $12,000
Driveway Sealcoating$0.15 – $0.30 per sq ft$150 – $400
Pothole Repair (per hole)$75 – $300$100 – $200
Crack Filling (per linear ft)$1 – $3 per ft$100 – $500
Full-Depth Patching (per sq ft)$8 – $15 per sq ft$500 – $2,500
Parking Lot Paving (commercial)$2.50 – $5 per sq ft$10,000 – $50,000+
Parking Lot Sealcoating$0.10 – $0.20 per sq ft$500 – $3,000

What Affects Price

FACTORS THAT AFFECT PAVING COST

Driveway Size

The most obvious factor — larger driveways cost more in total but less per square foot. A typical residential driveway is 400–800 sq ft.

Existing Conditions

If your old driveway needs to be removed, or if the sub-base needs grading or repair, costs increase. A clean slate costs less than fixing a problem base.

Asphalt Thickness

Residential driveways typically use 2" of asphalt. Commercial lots or areas with heavy vehicle traffic may need 3–4" for durability.

Access & Site Conditions

Steep grades, tight access, or difficult terrain add labor time and cost. Straightforward flat driveways are the most economical.

Season & Timing

Asphalt paving is a warm-weather job in upstate NY — typically April through November. Spring and fall are busiest; summer scheduling is often tightest.

Material Prices

Asphalt prices fluctuate with oil prices. We provide firm written estimates so you know exactly what you'll pay before any work begins.

Common Questions

PAVING COST FAQ

How much does a 20x20 asphalt driveway cost?

A 20x20 driveway (400 sq ft) typically costs $1,200 – $2,800 for new asphalt paving in upstate NY, depending on site conditions and whether the old surface needs removal.

How much does a 200-foot driveway cost to pave?

A 200-foot driveway at a typical 10-foot width (2,000 sq ft) runs approximately $6,000 – $14,000 for new asphalt in upstate NY. Longer driveways often get a lower per-square-foot price.

How often should I sealcoat my driveway?

Every 2–3 years is the standard recommendation for upstate NY. Our freeze-thaw winters are hard on asphalt — regular sealcoating protects against water infiltration, UV damage, and fuel spills.

Is asphalt or concrete cheaper for a driveway?

Asphalt is significantly cheaper upfront — typically $3–7/sq ft vs. $8–18/sq ft for concrete. Asphalt also handles upstate NY's freeze-thaw cycles better than concrete, which tends to crack more easily.

What is the cheapest option for paving a driveway?

Asphalt is the most cost-effective paved surface. Gravel is cheaper but requires ongoing maintenance. For a permanent, low-maintenance surface, asphalt offers the best value in upstate NY.

Do you offer free estimates?

Yes — all estimates are free, on-site, and come with a written quote so there are no surprises. Call (518) 832-8234 or submit a request online.

GET AN EXACT PRICE FOR YOUR PROJECT

Every job is different. Call us or request an estimate online — we'll come out, measure the job, and give you a firm written quote at no charge.